We are proud to offer the most esthetic all-ceramic restoration available, IPS e.max®. This innovative lithium disilicate is equipped with a unique crystalline structure which allows for incomparable esthetics and monolithic strength. It is a flexible solution and can be both a full-contour monolithic solution, as well as cut-back and layered with porcelain. No matter how it is constructed, IPS e.max® always offers exceptional esthetics and strength. It has three times the strength of alternative all-ceramic options and is virtually fracture-resistant. Its high esthetics comes from its four levels of translucency.
- 4 Levels of Translucency
- 500 MPa Flexural Strength
- Highly Customizable
- Outstanding Opalescence
- High Marginal Accuracy
IPS e.max is the premium lithium disilicate, glass-ceramic restoration. Combining lifelike materials and fracture resistant properties, IPS e.max is as durable as it is lifelike. The flexibility of IPS e.max makes it an excellent restorative method for anterior esthetics or posterior function.
Bridges which include molars, Maryland style bridges, and bridges which have a short vertical height that does not allow for adequate connector height.
Anterior full-coverage crowns require a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Facial reduction is 1.5 – 2 mm; 1 – 1.5 mm lingual contact clearance. Incisal reduction is 1.5 – 2 mm with rounded internal line angles, and an incisal edge at least 1mm wide to permit optimum milling of the incisal edge during CAD/CAM processing. Posterior full-coverage crown requires a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Occlusal reduction is 1.5 – 2 mm: axial reduction (buccal, lingual, and interproximal) is 1.5 mm with rounded internal line angles.
IPS e.max layered – can be cemented using a resin reinforced glass ionimer such as RelyX Luting cement. Or bonded using a resin cement when extra strength is needed due to lack of retention on the prep, use a resin cement such as RelyX Unicem or RelyX Ultimate.
If adjustments are needed, use fine diamonds with water and light pressure. Always remove the crown when adjusting or bond/cement crown before adjustments are made.
- D2740 Crown
- D2610 Inlay for 1 surface
- D2620 Inlay for 2 surfaces
- D2630 Inlay for 3 surfaces
- D2962 Labial Veneer
- D2783 Crown 3/4 Porcelain Ceramic (does not include veneers)